Can I Run BitNet b1.58 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

作者: Jakub Rusinowski · 最后更新: 2024年3月1日

Yes — comfortably

Yes, comfortably — BitNet b1.58 3B at Q8_0 needs about 5.2 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving ~10.8 GB spare and running at ~104 tok/s (estimated).

Confidence: medium · Recommended quantization: Q8_0 · Estimated speed: ~104 tok/s

Buy This HardwareIntel Arc B570 10GB — 10 GB VRAM · 150 W board powerDeploy in the Cloud NowRTX 4090 on RunPod — from $0.34/hr · rate checked 2026-07

or compare on Vast.ai from $0.35/hr (typical low · varies)

As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.

RTX 4090 Laptop (16 GB VRAM, 32 GB RAM) — what it gives a model

Usable memory for models16 GB
Memory bandwidth717 GB/s
Form factorLaptop
Operating systemWindows or Linux
Memory upgradeableYes

BitNet b1.58 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM): memory by quantization

QuantMemory neededFits 16 GB?Max contextEst. speedDownload
F168.3 GB✓ Yes~64.9 tok/s6.6 GB
Q8_05.2 GB✓ Yes~104 tok/s3.5 GB
Q6_K4.4 GB✓ Yes~123.2 tok/s2.7 GB
Q5_K_M4 GB✓ Yes~134.5 tok/s2.4 GB
Q4_K_M3.7 GB✓ Yes~147.4 tok/s2 GB
Q3_K_M3.1 GB✓ Yes~175.8 tok/s1.4 GB
Q2_K2.8 GB✓ Yes~196.6 tok/s1.1 GB

What to watch out for

RTX 4090 laptop limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run BitNet b1.58 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Yes, comfortably — BitNet b1.58 3B at Q8_0 needs about 5.2 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving ~10.8 GB spare and running at ~104 tok/s (estimated).

Which quantization of BitNet b1.58 should I use on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Q8_0 — it needs about 5.2 GB of the 16 GB available, downloads as roughly 3.5 GB, and runs at an estimated 104 tokens/sec.

What limits BitNet b1.58 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)

BitNet b1.58 on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | BitNet b1.58 model page | Check your hardware