Can I Run Granite 3.0 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Superseded model. Granite 3.0 has been superseded by IBM Granite 4.0. This page is kept for reference; the newer family is a better starting point. View IBM Granite 4.0 →

作者: Jakub Rusinowski · 最后更新: 2024年10月21日

Yes, but it is tight

Yes, but it is tight — Granite 3.0 8B Instruct at Q5_K_M needs about 7.8 GB of the 8 GB usable on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM), leaving only ~0.2 GB before the runtime starts swapping. Expect ~30 tok/s (estimated), with room for about 8,192 tokens of context.

Confidence: medium · Recommended quantization: Q5_K_M · Estimated speed: ~30 tok/s

Buy This HardwareIntel Arc B570 10GB — 10 GB VRAM · 150 W board powerDeploy in the Cloud NowRTX 4090 on RunPod — from $0.34/hr · rate checked 2026-07

or compare on Vast.ai from $0.35/hr (typical low · varies)

As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.

RTX 4060 Laptop (8 GB VRAM, 16 GB RAM) — what it gives a model

Usable memory for models8 GB
Memory bandwidth272 GB/s
Form factorLaptop
Operating systemWindows or Linux
Memory upgradeableYes
Price$1,099 (lib/data/laptops.ts (street price), checked 2026-07-06)

Granite 3.0 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM): memory by quantization

QuantMemory neededFits 8 GB?Max contextEst. speedDownload
F1618.1 GB✗ No16 GB
Q8_010.6 GB✗ No8.5 GB
Q6_K8.7 GB✗ No6.6 GB
Q5_K_M7.8 GB✓ Yes8K~30 tok/s5.7 GB
Q4_K_M7 GB✓ Yes8K~34.2 tok/s4.8 GB
Q3_K_M5.6 GB✓ Yes16K~44.9 tok/s3.4 GB
Q2_K4.8 GB✓ Yes16K~54.3 tok/s2.6 GB

What to watch out for

RTX 4060 laptop limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run Granite 3.0 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Yes, but it is tight — Granite 3.0 8B Instruct at Q5_K_M needs about 7.8 GB of the 8 GB usable on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM), leaving only ~0.2 GB before the runtime starts swapping. Expect ~30 tok/s (estimated), with room for about 8,192 tokens of context.

Which quantization of Granite 3.0 should I use on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Q5_K_M — it needs about 7.8 GB of the 8 GB available, downloads as roughly 5.7 GB, and runs at an estimated 30 tokens/sec with up to 8K of context.

What limits Granite 3.0 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)

Granite 3.0 on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | Granite 3.0 model page | Check your hardware