Can I Run Bonsai 27B on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Written by Jakub Rusinowski · Last updated July 15, 2026
Yes
Yes — 1-bit Bonsai 27B at Q3_K_M needs about 14.1 GB of the 16 GB usable on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) (~1.9 GB spare), at ~25.6 tok/s (estimated), with room for about 16,384 tokens of context.
Confidence: medium · Recommended quantization: Q3_K_M · Estimated speed: ~25.6 tok/s
RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) — what it gives a model
| Usable memory for models | 16 GB |
| Memory bandwidth | 448 GB/s |
| Form factor | Desktop |
| Operating system | Windows or Linux |
| Memory upgradeable | Yes |
Bonsai 27B on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM): memory by quantization
| Quant | Memory needed | Fits 16 GB? | Max context | Est. speed | Download |
|---|
| F16 | 56.5 GB | ✗ No | — | — | 54 GB |
| Q8_0 | 31.2 GB | ✗ No | — | — | 28.7 GB |
| Q6_K | 24.7 GB | ✗ No | — | — | 22.1 GB |
| Q5_K_M | 21.7 GB | ✗ No | — | — | 19.1 GB |
| Q4_K_M | 18.8 GB | ✗ No | — | — | 16.3 GB |
| Q3_K_M | 14.1 GB | ✓ Yes | 16K | ~25.6 tok/s | 11.5 GB |
| Q2_K | 11.4 GB | ✓ Yes | 16K | ~32 tok/s | 8.9 GB |
Which Bonsai 27B sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| 1-bit Bonsai 27B | 18.8 GB | ✗ Too large | — |
| Ternary Bonsai 27B | 18.8 GB | ✗ Too large | — |
What to watch out for
- Q3_K_M is the only quantization that fits, and it is a heavily degraded one — expect noticeably worse output than the same model at Q4_K_M. A smaller model at Q4 is usually the better trade.
- 2 larger variants of Bonsai 27B do not fit and would need CPU offload or different hardware.
- This model does not publish its full attention configuration, so the KV-cache share of these figures is inferred from its parameter count rather than computed exactly.
RTX 5060 Ti 16 GB desktop limitations
- The cheapest current 16 GB card, but its 448 GB/s bandwidth caps generation speed well below a 5080 on the same model.
Recommended setup
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 16 GB of VRAM on the NVIDIA GeForce RTX 5060 Ti 16GB at 448 GB/s.
- 32 GB of system RAM available for CPU offload when a model exceeds VRAM.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is inferred from the parameter count because this model does not publish its full attention configuration.
FAQ
Can I run Bonsai 27B on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Yes — 1-bit Bonsai 27B at Q3_K_M needs about 14.1 GB of the 16 GB usable on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) (~1.9 GB spare), at ~25.6 tok/s (estimated), with room for about 16,384 tokens of context.
Which quantization of Bonsai 27B should I use on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Q3_K_M — it needs about 14.1 GB of the 16 GB available, downloads as roughly 11.5 GB, and runs at an estimated 25.6 tokens/sec with up to 16K of context.
What limits Bonsai 27B on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
Other Computers
Other Models on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)
Bonsai 27B on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | Bonsai 27B model page | Check your hardware