Can I Run DeepSeek-R1-Distill-Llama-8B on 8 GB system RAM?
Superseded model. DeepSeek R1 has been superseded by DeepSeek V4. This page is kept for reference; the newer family is a better starting point.
View DeepSeek V4 →
Written by Jakub Rusinowski · Last updated January 20, 2025
These figures are for DeepSeek-R1-Distill-Llama-8B, a distill of Llama-3.1-8B — not the full DeepSeek R1. The full DeepSeek R1 (671B) needs about 405 GB of weights at Q4_K_M and is a different model.
Yes
Yes — DeepSeek R1 Distill Llama 8B at Q3_K_M needs about 5.3 GB of the 6.4 GB usable on 8 GB system RAM (~1.1 GB spare), at ~16.4 tok/s (estimated), with room for about 16,384 tokens of context.
Confidence: high · Recommended quantization: Q3_K_M · Estimated speed: ~16.4 tok/s
8 GB system RAM — what it gives a model
| Usable memory for models | 6.4 GB |
| Memory bandwidth | 90 GB/s |
DeepSeek R1 on 8 GB system RAM: memory by quantization
| Quant | Memory needed | Fits 6.4 GB? | Max context | Est. speed | Download |
|---|
| F16 | 17.9 GB | ✗ No | — | — | 16 GB |
| Q8_0 | 10.4 GB | ✗ No | — | — | 8.5 GB |
| Q6_K | 8.4 GB | ✗ No | — | — | 6.6 GB |
| Q5_K_M | 7.5 GB | ✗ No | — | — | 5.7 GB |
| Q4_K_M | 6.7 GB | ✗ No | — | — | 4.8 GB |
| Q3_K_M | 5.3 GB | ✓ Yes | 16K | ~16.4 tok/s | 3.4 GB |
| Q2_K | 4.5 GB | ✓ Yes | 16K | ~20.3 tok/s | 2.6 GB |
Which DeepSeek R1 sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| DeepSeek R1 (671B) | 406.5 GB | ✗ Too large | — |
| DeepSeek R1 Distill Qwen 32B | 22.3 GB | ✗ Too large | — |
| DeepSeek R1 Distill Qwen 14B | 10.6 GB | ✗ Too large | — |
| DeepSeek R1 Distill Llama 8B | 6.7 GB | ✗ Too large | — |
What to watch out for
- Only ~1.1 GB of headroom at Q3_K_M: a longer context or a second application can push this into swapping.
- Q3_K_M is the only quantization that fits, and it is a heavily degraded one — expect noticeably worse output than the same model at Q4_K_M. A smaller model at Q4 is usually the better trade.
- 4 larger variants of DeepSeek R1 do not fit and would need CPU offload or different hardware.
- These figures assume CPU-only inference. Any discrete GPU, even an 8 GB one, will be several times faster for models that fit in its VRAM.
Recommended setup
llama.cpp (CPU build) or Ollama — both run without a GPU
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 6.4 GB of the 8 GB is treated as usable for model weights (80% — the rest is the OS and running applications).
- DDR5-5600 dual channel at 89.6 GB/s peak. CPU decode is assumed to sustain 35% of that peak, because CPU inference is not purely bandwidth-bound — it also spends real time in compute and thread synchronisation. This figure is an assumption, not a fitted constant: no CPU measurement is in the calibration set.
- CPU-only inference: no GPU is assumed. A GPU of any size will beat these figures substantially.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run DeepSeek R1 on 8 GB system RAM?
Yes — DeepSeek R1 Distill Llama 8B at Q3_K_M needs about 5.3 GB of the 6.4 GB usable on 8 GB system RAM (~1.1 GB spare), at ~16.4 tok/s (estimated), with room for about 16,384 tokens of context.
Which quantization of DeepSeek R1 should I use on 8 GB system RAM?
Q3_K_M — it needs about 5.3 GB of the 6.4 GB available, downloads as roughly 3.4 GB, and runs at an estimated 16.4 tokens/sec with up to 16K of context.
What limits DeepSeek R1 on 8 GB system RAM?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
llama.cpp (CPU build) or Ollama — both run without a GPU
Other Models on 8 GB system RAM
DeepSeek R1 on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | DeepSeek R1 model page | Check your hardware