Can I Run Gemma 4 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Written by Jakub Rusinowski · Last updated June 3, 2026

Yes, but it is tight

Yes, but it is tight — Gemma 4 E4B at Q5_K_M needs about 7.6 GB of the 8 GB usable on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM), leaving only ~0.4 GB before the runtime starts swapping. Expect ~28.8 tok/s (estimated), with room for about 8,192 tokens of context.

Confidence: low · Recommended quantization: Q5_K_M · Estimated speed: ~28.8 tok/s

Get a personalized upgrade path →

RTX 4060 Laptop (8 GB VRAM, 16 GB RAM) — what it gives a model

Usable memory for models8 GB
Memory bandwidth256 GB/s
Form factorLaptop
Operating systemWindows or Linux
Memory upgradeableYes
Price$1,099 (lib/data/laptops.ts (street price), checked 2026-07-06)

Gemma 4 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM): memory by quantization

QuantMemory neededFits 8 GB?Max contextEst. speedDownload
F1617.9 GB✗ No——16 GB
Q8_010.4 GB✗ No——8.5 GB
Q6_K8.5 GB✗ No——6.6 GB
Q5_K_M7.6 GB✓ Yes8K~28.8 tok/s5.7 GB
Q4_K_M6.8 GB✓ Yes16K~32.9 tok/s4.8 GB
Q3_K_M5.4 GB✓ Yes16K~43.5 tok/s3.4 GB
Q2_K4.6 GB✓ Yes32K~52.9 tok/s2.6 GB

Which Gemma 4 sizes fit

VariantNeeds at Q4_K_MFits?Est. speed
Gemma 4 31B21.3 GB✗ Too large—
Gemma 4 26B-A4B18.2 GB✗ Too large—
Gemma 4 12B (Unified)9.4 GB✗ Too large—
Gemma 4 E4B6.8 GB✓ Fits~32.9 tok/s
Gemma 4 E2B4.9 GB✓ Fits~47.8 tok/s

What to watch out for

RTX 4060 laptop limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run Gemma 4 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Yes, but it is tight — Gemma 4 E4B at Q5_K_M needs about 7.6 GB of the 8 GB usable on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM), leaving only ~0.4 GB before the runtime starts swapping. Expect ~28.8 tok/s (estimated), with room for about 8,192 tokens of context.

Which quantization of Gemma 4 should I use on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Q5_K_M — it needs about 7.6 GB of the 8 GB available, downloads as roughly 5.7 GB, and runs at an estimated 28.8 tokens/sec with up to 8K of context.

What limits Gemma 4 on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on RTX 4060 Laptop (8 GB VRAM, 16 GB RAM)

Gemma 4 on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | Gemma 4 model page | Check your hardware