Can I Run Granite 3.0 on MacBook Pro 16" (M4 Max, 128 GB)?
Written by Jakub Rusinowski · Last updated October 21, 2024
Yes — comfortably
Yes, comfortably — Granite 3.0 8B Instruct at Q8_0 needs about 10.6 GB of the 96 GB usable on MacBook Pro 16" (M4 Max, 128 GB), leaving ~85.4 GB spare and running at ~29.7 tok/s (estimated), with room for about 131,072 tokens of context.
Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~29.7 tok/s
See what else this hardware can run →
or compare on Vast.ai from $0.35/hr (typical low · varies)
As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.
MacBook Pro 16" (M4 Max, 128 GB) — what it gives a model
| Usable memory for models | 96 GB |
| Memory bandwidth | 546 GB/s |
| Form factor | Laptop |
| Operating system | macOS |
| Memory upgradeable | No — soldered |
Granite 3.0 on MacBook Pro 16" (M4 Max, 128 GB): memory by quantization
| Quant | Memory needed | Fits 96 GB? | Max context | Est. speed | Download |
|---|---|---|---|---|---|
| F16 | 18.1 GB | ✓ Yes | 128K | ~17 tok/s | 16 GB |
| Q8_0 | 10.6 GB | ✓ Yes | 128K | ~29.7 tok/s | 8.5 GB |
| Q6_K | 8.7 GB | ✓ Yes | 128K | ~36.8 tok/s | 6.6 GB |
| Q5_K_M | 7.8 GB | ✓ Yes | 128K | ~41.3 tok/s | 5.7 GB |
| Q4_K_M | 7 GB | ✓ Yes | 128K | ~46.8 tok/s | 4.8 GB |
| Q3_K_M | 5.6 GB | ✓ Yes | 128K | ~60.1 tok/s | 3.4 GB |
| Q2_K | 4.8 GB | ✓ Yes | 128K | ~71.3 tok/s | 2.6 GB |
What to watch out for
- Memory on this machine is not upgradeable, so the configuration you buy is the ceiling for every model you will ever run on it.
MacBook Pro M4 Max 128 GB limitations
- Unified memory is soldered — the 128 GB decision is permanent and cannot be upgraded later.
- Sustained decode speed on battery is materially below the plugged-in figures quoted here.
Recommended setup
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 128 GB unified memory at 546 GB/s, shared between CPU and GPU.
- macOS reserves a share of unified memory for the system, so not all of it is available to a model.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Granite 3.0 on MacBook Pro 16" (M4 Max, 128 GB)?
Yes, comfortably — Granite 3.0 8B Instruct at Q8_0 needs about 10.6 GB of the 96 GB usable on MacBook Pro 16" (M4 Max, 128 GB), leaving ~85.4 GB spare and running at ~29.7 tok/s (estimated), with room for about 131,072 tokens of context.
Which quantization of Granite 3.0 should I use on MacBook Pro 16" (M4 Max, 128 GB)?
Q8_0 — it needs about 10.6 GB of the 96 GB available, downloads as roughly 8.5 GB, and runs at an estimated 29.7 tokens/sec with up to 128K of context.
What limits Granite 3.0 on MacBook Pro 16" (M4 Max, 128 GB)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
Other Computers
- Granite 3.0 on MacBook Pro M4 Max 48 GB
- Granite 3.0 on MacBook Pro M4 Pro 24 GB
- Granite 3.0 on MacBook Air M4 16 GB
Other Models on MacBook Pro 16" (M4 Max, 128 GB)
- IBM Granite 4.0 on MacBook Pro 16" (M4 Max, 128 GB)
- IBM Granite 4.1 on MacBook Pro 16" (M4 Max, 128 GB)
- IBM Granite 4.2 on MacBook Pro 16" (M4 Max, 128 GB)
- InternLM 3 on MacBook Pro 16" (M4 Max, 128 GB)
- LFM2.5 on MacBook Pro 16" (M4 Max, 128 GB)
Granite 3.0 on GPUs
- Granite 3.0 on NVIDIA GeForce RTX 5070
- Granite 3.0 on NVIDIA GeForce RTX 5060 Ti 8GB
- Granite 3.0 on NVIDIA GeForce RTX 5060
- Granite 3.0 on NVIDIA GeForce RTX 4070 Ti
What This Model Is Good At
Model & Tools
← Can I Run It? | Granite 3.0 model page | Check your hardware