Can I Run LFM2.5 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Written by Jakub Rusinowski · Last updated October 15, 2026

Yes, but it is tight

Yes, but it is tight — LFM2.5-24B-A2B at Q4_K_M needs about 15.5 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving only ~0.5 GB before the runtime starts swapping. Expect ~170.5 tok/s (estimated), with room for about 32,768 tokens of context.

Confidence: medium · Recommended quantization: Q4_K_M · Estimated speed: ~170.5 tok/s

Get a personalized upgrade path →

Deploy in the cloud now RTX 4090 on RunPod — from $0.34/hr · rate checked 2026-07

or compare on Vast.ai from $0.35/hr (typical low · varies)

As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.

RTX 4090 Laptop (16 GB VRAM, 32 GB RAM) — what it gives a model

Usable memory for models16 GB
Memory bandwidth576 GB/s
Form factorLaptop
Operating systemWindows or Linux
Memory upgradeableYes

LFM2.5 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM): memory by quantization

QuantMemory neededFits 16 GB?Max contextEst. speedDownload
F1648.9 GB✗ No——48 GB
Q8_026.5 GB✗ No——25.5 GB
Q6_K20.7 GB✗ No——19.7 GB
Q5_K_M18 GB✗ No——17 GB
Q4_K_M15.5 GB✓ Yes32K~170.5 tok/s14.5 GB
Q3_K_M11.2 GB✓ Yes128K~205.9 tok/s10.2 GB
Q2_K8.8 GB✓ Yes128K~232.3 tok/s7.9 GB

Which LFM2.5 sizes fit

VariantNeeds at Q4_K_MFits?Est. speed
LFM2.5-24B-A2B15.5 GB✓ Fits~170.5 tok/s
LFM2.5-8B-A1B7 GB✓ Fits~175.4 tok/s
LFM2.5 2.6B3.2 GB✓ Fits~144.1 tok/s

What to watch out for

RTX 4090 laptop limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run LFM2.5 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Yes, but it is tight — LFM2.5-24B-A2B at Q4_K_M needs about 15.5 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving only ~0.5 GB before the runtime starts swapping. Expect ~170.5 tok/s (estimated), with room for about 32,768 tokens of context.

Which quantization of LFM2.5 should I use on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Q4_K_M — it needs about 15.5 GB of the 16 GB available, downloads as roughly 14.5 GB, and runs at an estimated 170.5 tokens/sec with up to 32K of context.

What limits LFM2.5 on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)

LFM2.5 on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | LFM2.5 model page | Check your hardware