Can I Run MiMo-V2.5 on 192 GB system RAM?
Written by Jakub Rusinowski · Last updated September 6, 2026
Yes
Yes — MiMo-V2.5 310B at Q3_K_M needs about 136.8 GB of the 153.6 GB usable on 192 GB system RAM (~16.8 GB spare), at ~7.9 tok/s (estimated), with room for about 32,768 tokens of context.
Confidence: medium · Recommended quantization: Q3_K_M · Estimated speed: ~7.9 tok/s
or compare on Vast.ai
As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.
192 GB system RAM — what it gives a model
| Usable memory for models | 153.6 GB |
| Memory bandwidth | 90 GB/s |
MiMo-V2.5 on 192 GB system RAM: memory by quantization
| Quant | Memory needed | Fits 153.6 GB? | Max context | Est. speed | Download |
|---|
| F16 | 624.7 GB | ✗ No | — | — | 620 GB |
| Q8_0 | 334.1 GB | ✗ No | — | — | 329.4 GB |
| Q6_K | 258.9 GB | ✗ No | — | — | 254.2 GB |
| Q5_K_M | 224.4 GB | ✗ No | — | — | 219.7 GB |
| Q4_K_M | 191.9 GB | ✗ No | — | — | 187.2 GB |
| Q3_K_M | 136.8 GB | ✓ Yes | 32K | ~7.9 tok/s | 132.1 GB |
| Q2_K | 106.6 GB | ✓ Yes | 64K | ~9.6 tok/s | 101.9 GB |
Which MiMo-V2.5 sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| MiMo-V2.5-Pro 1T | 610.3 GB | ✗ Too large | — |
| MiMo-V2.5 310B | 191.9 GB | ✗ Too large | — |
What to watch out for
- Q3_K_M is the only quantization that fits, and it is a heavily degraded one — expect noticeably worse output than the same model at Q4_K_M. A smaller model at Q4 is usually the better trade.
- 2 larger variants of MiMo-V2.5 do not fit and would need CPU offload or different hardware.
- This model does not publish its full attention configuration, so the KV-cache share of these figures is inferred from its parameter count rather than computed exactly.
- These figures assume CPU-only inference. Any discrete GPU, even an 8 GB one, will be several times faster for models that fit in its VRAM.
Recommended setup
llama.cpp (CPU build) or Ollama — both run without a GPU
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 153.6 GB of the 192 GB is treated as usable for model weights (80% — the rest is the OS and running applications).
- DDR5-5600 dual channel at 89.6 GB/s peak. CPU decode is assumed to sustain 35% of that peak, because CPU inference is not purely bandwidth-bound — it also spends real time in compute and thread synchronisation. This figure is an assumption, not a fitted constant: no CPU measurement is in the calibration set.
- CPU-only inference: no GPU is assumed. A GPU of any size will beat these figures substantially.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is inferred from the parameter count because this model does not publish its full attention configuration.
FAQ
Can I run MiMo-V2.5 on 192 GB system RAM?
Yes — MiMo-V2.5 310B at Q3_K_M needs about 136.8 GB of the 153.6 GB usable on 192 GB system RAM (~16.8 GB spare), at ~7.9 tok/s (estimated), with room for about 32,768 tokens of context.
Which quantization of MiMo-V2.5 should I use on 192 GB system RAM?
Q3_K_M — it needs about 136.8 GB of the 153.6 GB available, downloads as roughly 132.1 GB, and runs at an estimated 7.9 tokens/sec with up to 32K of context.
What limits MiMo-V2.5 on 192 GB system RAM?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
llama.cpp (CPU build) or Ollama — both run without a GPU
Other RAM Capacities
Other Models on 192 GB system RAM
MiMo-V2.5 on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | MiMo-V2.5 model page | Check your hardware