Can I Run Ministral on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Superseded model. Ministral has been superseded by Mistral Small 4. This page is kept for reference; the newer family is a better starting point. View Mistral Small 4 →

Written by Jakub Rusinowski · Last updated October 16, 2024

Yes — comfortably

Yes, comfortably — Ministral 8B at Q8_0 needs about 10.5 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving ~5.5 GB spare and running at ~52 tok/s (estimated), with room for about 32,768 tokens of context.

Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~52 tok/s

RTX 4090 Laptop (16 GB VRAM, 32 GB RAM) — what it gives a model

Usable memory for models16 GB
Memory bandwidth717 GB/s
Form factorLaptop
Operating systemWindows or Linux
Memory upgradeableYes

Ministral on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM): memory by quantization

QuantMemory neededFits 16 GB?Max contextEst. speedDownload
F1618 GB✗ No16 GB
Q8_010.5 GB✓ Yes32K~52 tok/s8.5 GB
Q6_K8.6 GB✓ Yes32K~64.1 tok/s6.6 GB
Q5_K_M7.7 GB✓ Yes32K~71.7 tok/s5.7 GB
Q4_K_M6.9 GB✓ Yes32K~80.8 tok/s4.8 GB
Q3_K_M5.4 GB✓ Yes32K~102.8 tok/s3.4 GB
Q2_K4.6 GB✓ Yes32K~120.9 tok/s2.6 GB

Which Ministral sizes fit

VariantNeeds at Q4_K_MFits?Est. speed
Ministral 8B6.9 GB✓ Fits~80.8 tok/s
Ministral 3B3.8 GB✓ Fits~140.9 tok/s

RTX 4090 laptop limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run Ministral on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Yes, comfortably — Ministral 8B at Q8_0 needs about 10.5 GB of the 16 GB usable on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM), leaving ~5.5 GB spare and running at ~52 tok/s (estimated), with room for about 32,768 tokens of context.

Which quantization of Ministral should I use on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Q8_0 — it needs about 10.5 GB of the 16 GB available, downloads as roughly 8.5 GB, and runs at an estimated 52 tokens/sec with up to 32K of context.

What limits Ministral on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on RTX 4090 Laptop (16 GB VRAM, 32 GB RAM)

Ministral on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | Ministral model page | Check your hardware