Can I Run Ministral on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)?
Written by Jakub Rusinowski · Last updated October 16, 2024
Yes — comfortably
Yes, comfortably — Ministral 8B at Q8_0 needs about 10.5 GB of the 32 GB usable on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM), leaving ~21.5 GB spare and running at ~110.7 tok/s (estimated), with room for about 32,768 tokens of context.
Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~110.7 tok/s
See what else this hardware can run →
or compare on Vast.ai from $0.35/hr (typical low · varies)
As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.
RTX 5090 Desktop (32 GB VRAM, 64 GB RAM) — what it gives a model
| Usable memory for models | 32 GB |
| Memory bandwidth | 1792 GB/s |
| Form factor | Desktop |
| Operating system | Windows or Linux |
| Memory upgradeable | Yes |
Ministral on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM): memory by quantization
| Quant | Memory needed | Fits 32 GB? | Max context | Est. speed | Download |
|---|---|---|---|---|---|
| F16 | 18 GB | ✓ Yes | 32K | ~68.4 tok/s | 16 GB |
| Q8_0 | 10.5 GB | ✓ Yes | 32K | ~110.7 tok/s | 8.5 GB |
| Q6_K | 8.6 GB | ✓ Yes | 32K | ~131.8 tok/s | 6.6 GB |
| Q5_K_M | 7.7 GB | ✓ Yes | 32K | ~144.4 tok/s | 5.7 GB |
| Q4_K_M | 6.9 GB | ✓ Yes | 32K | ~158.8 tok/s | 4.8 GB |
| Q3_K_M | 5.4 GB | ✓ Yes | 32K | ~190.9 tok/s | 3.4 GB |
| Q2_K | 4.6 GB | ✓ Yes | 32K | ~214.7 tok/s | 2.6 GB |
Which Ministral sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|---|---|---|
| Ministral 8B | 6.9 GB | ✓ Fits | ~158.8 tok/s |
| Ministral 3B | 3.8 GB | ✓ Fits | ~238.8 tok/s |
RTX 5090 desktop limitations
- 575 W board power — budget for a 1000 W+ PSU and the heat it puts into the room.
- Models larger than 32 GB must offload to system RAM, which costs roughly an order of magnitude in speed.
Recommended setup
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 32 GB of VRAM on the NVIDIA GeForce RTX 5090 at 1792 GB/s.
- 64 GB of system RAM available for CPU offload when a model exceeds VRAM.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Ministral on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)?
Yes, comfortably — Ministral 8B at Q8_0 needs about 10.5 GB of the 32 GB usable on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM), leaving ~21.5 GB spare and running at ~110.7 tok/s (estimated), with room for about 32,768 tokens of context.
Which quantization of Ministral should I use on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)?
Q8_0 — it needs about 10.5 GB of the 32 GB available, downloads as roughly 8.5 GB, and runs at an estimated 110.7 tokens/sec with up to 32K of context.
What limits Ministral on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
Other Computers
Other Models on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
- Ministral 3 on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
- Mistral Family on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
- Mistral Small 3.1 on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
- Mistral Small 3.2 on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
- Nemotron 3 Nano Omni on RTX 5090 Desktop (32 GB VRAM, 64 GB RAM)
Ministral on GPUs
- Ministral on NVIDIA GeForce RTX 5070
- Ministral on NVIDIA GeForce RTX 5060 Ti 8GB
- Ministral on NVIDIA GeForce RTX 5060
- Ministral on NVIDIA GeForce RTX 4070 Ti
What This Model Is Good At
Model & Tools
← Can I Run It? | Ministral model page | Check your hardware