Can I Run Nex-N2 on Beelink SER9 (Ryzen AI 9, 32 GB)?

Written by Jakub Rusinowski · Last updated September 8, 2026

Yes, but it is tight

Yes, but it is tight — Nex-N2 mini at Q6_K needs about 31.4 GB of the 32 GB usable on Beelink SER9 (Ryzen AI 9, 32 GB), leaving only ~0.6 GB before the runtime starts swapping. Expect ~50.1 tok/s (estimated), with room for about 8,192 tokens of context.

Confidence: low · Recommended quantization: Q6_K · Estimated speed: ~50.1 tok/s

Buy This HardwareApple Mac mini M4 (16GB) — 32 GB VRAM · 22 W board powerDeploy in the Cloud NowNVIDIA A40 on RunPod — from $0.44/hr · rate checked 2026-08

or compare on Vast.ai

As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.

Beelink SER9 (Ryzen AI 9, 32 GB) — what it gives a model

Usable memory for models32 GB
Memory bandwidth256 GB/s
Form factorMini PC
Operating systemWindows or Linux
Memory upgradeableYes
Price$859 (lib/data/ai-stations.ts (street price), checked 2026-07-06)

Nex-N2 on Beelink SER9 (Ryzen AI 9, 32 GB): memory by quantization

QuantMemory neededFits 32 GB?Max contextEst. speedDownload
F1672.7 GB✗ No70 GB
Q8_039.9 GB✗ No37.2 GB
Q6_K31.4 GB✓ Yes8K~50.1 tok/s28.7 GB
Q5_K_M27.5 GB✓ Yes16K~54.9 tok/s24.8 GB
Q4_K_M23.8 GB✓ Yes32K~60.3 tok/s21.1 GB
Q3_K_M17.6 GB✓ Yes64K~72.5 tok/s14.9 GB
Q2_K14.2 GB✓ Yes64K~81.5 tok/s11.5 GB

Which Nex-N2 sizes fit

VariantNeeds at Q4_K_MFits?Est. speed
Nex-N2 Pro244.7 GB✗ Too large
Nex-N2 mini23.8 GB✓ Fits~60.3 tok/s

What to watch out for

Beelink SER9 32 GB limitations

Recommended setup

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

How these numbers are calculated

FAQ

Can I run Nex-N2 on Beelink SER9 (Ryzen AI 9, 32 GB)?

Yes, but it is tight — Nex-N2 mini at Q6_K needs about 31.4 GB of the 32 GB usable on Beelink SER9 (Ryzen AI 9, 32 GB), leaving only ~0.6 GB before the runtime starts swapping. Expect ~50.1 tok/s (estimated), with room for about 8,192 tokens of context.

Which quantization of Nex-N2 should I use on Beelink SER9 (Ryzen AI 9, 32 GB)?

Q6_K — it needs about 31.4 GB of the 32 GB available, downloads as roughly 28.7 GB, and runs at an estimated 50.1 tokens/sec with up to 8K of context.

What limits Nex-N2 on Beelink SER9 (Ryzen AI 9, 32 GB)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving

Other Computers

Other Models on Beelink SER9 (Ryzen AI 9, 32 GB)

Nex-N2 on GPUs

What This Model Is Good At

Model & Tools

← Can I Run It? | Nex-N2 model page | Check your hardware