Can I Run Phi-4 Mini on Mac Studio (M3 Ultra, 256 GB)?
Written by Jakub Rusinowski · Last updated February 4, 2025
Yes — comfortably
Yes, comfortably — Phi-4 Mini (3.8B) at Q8_0 needs about 5.9 GB of the 192 GB usable on Mac Studio (M3 Ultra, 256 GB), leaving ~186.1 GB spare and running at ~75.8 tok/s (estimated), with room for about 65,536 tokens of context.
Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~75.8 tok/s
See what else this hardware can run →
or compare on Vast.ai from $0.35/hr (typical low · varies)
As an Amazon Associate we earn from qualifying purchases. Cloud GPU links are referral links — we may earn a commission at no extra cost to you.
Mac Studio (M3 Ultra, 256 GB) — what it gives a model
| Usable memory for models | 192 GB |
| Memory bandwidth | 819 GB/s |
| Form factor | Desktop |
| Operating system | macOS |
| Memory upgradeable | No — soldered |
Phi-4 Mini on Mac Studio (M3 Ultra, 256 GB): memory by quantization
| Quant | Memory needed | Fits 192 GB? | Max context | Est. speed | Download |
|---|---|---|---|---|---|
| F16 | 9.5 GB | ✓ Yes | 64K | ~47.3 tok/s | 7.6 GB |
| Q8_0 | 5.9 GB | ✓ Yes | 64K | ~75.8 tok/s | 4 GB |
| Q6_K | 5 GB | ✓ Yes | 64K | ~89.8 tok/s | 3.1 GB |
| Q5_K_M | 4.6 GB | ✓ Yes | 64K | ~98.1 tok/s | 2.7 GB |
| Q4_K_M | 4.2 GB | ✓ Yes | 64K | ~107.4 tok/s | 2.3 GB |
| Q3_K_M | 3.5 GB | ✓ Yes | 64K | ~128.1 tok/s | 1.6 GB |
| Q2_K | 3.1 GB | ✓ Yes | 64K | ~143.3 tok/s | 1.2 GB |
What to watch out for
- Memory on this machine is not upgradeable, so the configuration you buy is the ceiling for every model you will ever run on it.
Mac Studio M3 Ultra 256 GB limitations
- The largest single-box unified memory pool available, but at roughly half the memory bandwidth of a high-end discrete GPU — very large models load, then run slowly.
- Memory is soldered; the configuration chosen at purchase is permanent.
Recommended setup
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 256 GB unified memory at 819 GB/s, shared between CPU and GPU.
- macOS reserves a share of unified memory for the system, so not all of it is available to a model.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Phi-4 Mini on Mac Studio (M3 Ultra, 256 GB)?
Yes, comfortably — Phi-4 Mini (3.8B) at Q8_0 needs about 5.9 GB of the 192 GB usable on Mac Studio (M3 Ultra, 256 GB), leaving ~186.1 GB spare and running at ~75.8 tok/s (estimated), with room for about 65,536 tokens of context.
Which quantization of Phi-4 Mini should I use on Mac Studio (M3 Ultra, 256 GB)?
Q8_0 — it needs about 5.9 GB of the 192 GB available, downloads as roughly 4 GB, and runs at an estimated 75.8 tokens/sec with up to 64K of context.
What limits Phi-4 Mini on Mac Studio (M3 Ultra, 256 GB)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
Other Computers
Other Models on Mac Studio (M3 Ultra, 256 GB)
- Poolside Laguna XS 2.1 on Mac Studio (M3 Ultra, 256 GB)
- Qwen 2.5 Family on Mac Studio (M3 Ultra, 256 GB)
- Qwen 2.5 VL on Mac Studio (M3 Ultra, 256 GB)
- Qwen 3 on Mac Studio (M3 Ultra, 256 GB)
- Qwen 3.5 on Mac Studio (M3 Ultra, 256 GB)
Phi-4 Mini on GPUs
- Phi-4 Mini on NVIDIA GeForce RTX 5060 Ti 8GB
- Phi-4 Mini on NVIDIA GeForce RTX 5060
- Phi-4 Mini on NVIDIA GeForce RTX 4060
What This Model Is Good At
Model & Tools
← Can I Run It? | Phi-4 Mini model page | Check your hardware