Can I Run Qwen 2.5 Family on 128 GB system RAM?
Superseded model. Qwen 2.5 Family has been superseded by Qwen 3. This page is kept for reference; the newer family is a better starting point.
View Qwen 3 →
Written by Jakub Rusinowski · Last updated November 12, 2024
Technically yes, but not recommended
It loads, but it is not worth running — Qwen 2.5 72B Instruct at Q8_0 fits in 128 GB system RAM's 102.4 GB, yet the memory bandwidth limits it to ~0.9 tok/s (estimated), well below usable interactive speed.
Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~0.9 tok/s
128 GB system RAM — what it gives a model
| Usable memory for models | 102.4 GB |
| Memory bandwidth | 90 GB/s |
Qwen 2.5 Family on 128 GB system RAM: memory by quantization
| Quant | Memory needed | Fits 102.4 GB? | Max context | Est. speed | Download |
|---|
| F16 | 147.5 GB | ✗ No | — | — | 144 GB |
| Q8_0 | 80 GB | ✓ Yes | 64K | ~0.9 tok/s | 76.5 GB |
| Q6_K | 62.5 GB | ✓ Yes | 64K | ~1.1 tok/s | 59 GB |
| Q5_K_M | 54.5 GB | ✓ Yes | 128K | ~1.3 tok/s | 51 GB |
| Q4_K_M | 47 GB | ✓ Yes | 128K | ~1.5 tok/s | 43.5 GB |
| Q3_K_M | 34.2 GB | ✓ Yes | 128K | ~2.1 tok/s | 30.7 GB |
| Q2_K | 27.2 GB | ✓ Yes | 128K | ~2.7 tok/s | 23.7 GB |
Which Qwen 2.5 Family sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| Qwen 2.5 72B Instruct | 47 GB | ✓ Fits | ~1.5 tok/s |
| Qwen 2.5 Coder 32B | 22.3 GB | ✓ Fits | ~3.3 tok/s |
| Qwen 2.5 14B Instruct | 10.9 GB | ✓ Fits | ~7.1 tok/s |
| Qwen 2.5 7B Instruct | 5.9 GB | ✓ Fits | ~13.5 tok/s |
What to watch out for
- At ~0.9 tok/s this loads but is too slow for interactive use — expect roughly 67 seconds per 60 tokens.
- These figures assume CPU-only inference. Any discrete GPU, even an 8 GB one, will be several times faster for models that fit in its VRAM.
Recommended setup
llama.cpp (CPU build) or Ollama — both run without a GPU
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 102.4 GB of the 128 GB is treated as usable for model weights (80% — the rest is the OS and running applications).
- DDR5-5600 dual channel at 89.6 GB/s peak. CPU decode is assumed to sustain 35% of that peak, because CPU inference is not purely bandwidth-bound — it also spends real time in compute and thread synchronisation. This figure is an assumption, not a fitted constant: no CPU measurement is in the calibration set.
- CPU-only inference: no GPU is assumed. A GPU of any size will beat these figures substantially.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Qwen 2.5 Family on 128 GB system RAM?
It loads, but it is not worth running — Qwen 2.5 72B Instruct at Q8_0 fits in 128 GB system RAM's 102.4 GB, yet the memory bandwidth limits it to ~0.9 tok/s (estimated), well below usable interactive speed.
Which quantization of Qwen 2.5 Family should I use on 128 GB system RAM?
Q8_0 — it needs about 80 GB of the 102.4 GB available, downloads as roughly 76.5 GB, and runs at an estimated 0.9 tokens/sec with up to 64K of context.
What limits Qwen 2.5 Family on 128 GB system RAM?
Memory bandwidth. The model fits, but at 89.6 GB/s it can only be read fast enough for roughly 0.9 tokens/sec.
Which runtime should I use?
llama.cpp (CPU build) or Ollama — both run without a GPU
Other RAM Capacities
Other Models on 128 GB system RAM
Qwen 2.5 Family on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | Qwen 2.5 Family model page | Check your hardware