Can I Run Cosmos 3 on 8 GB system RAM?
Written by Jakub Rusinowski · Last updated July 21, 2026
Yes, but it is tight
Yes, but it is tight — Cosmos 3 Edge at Q8_0 needs about 6 GB of the 6.4 GB usable on 8 GB system RAM, leaving only ~0.4 GB before the runtime starts swapping. Expect ~24.6 tok/s (estimated), with room for about 8,192 tokens of context.
Confidence: low · Recommended quantization: Q8_0 · Estimated speed: ~24.6 tok/s
8 GB system RAM — what it gives a model
| Usable memory for models | 6.4 GB |
| Memory bandwidth | 90 GB/s |
Cosmos 3 on 8 GB system RAM: memory by quantization
| Quant | Memory needed | Fits 6.4 GB? | Max context | Est. speed | Download |
|---|
| F16 | 9.7 GB | ✗ No | — | — | 8 GB |
| Q8_0 | 6 GB | ✓ Yes | 8K | ~24.6 tok/s | 4.3 GB |
| Q6_K | 5 GB | ✓ Yes | 16K | ~29.9 tok/s | 3.3 GB |
| Q5_K_M | 4.5 GB | ✓ Yes | 16K | ~33.2 tok/s | 2.8 GB |
| Q4_K_M | 4.1 GB | ✓ Yes | 16K | ~37.1 tok/s | 2.4 GB |
| Q3_K_M | 3.4 GB | ✓ Yes | 16K | ~46.1 tok/s | 1.7 GB |
| Q2_K | 3 GB | ✓ Yes | 16K | ~53.3 tok/s | 1.3 GB |
Which Cosmos 3 sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| Cosmos 3 Super | 41.8 GB | ✗ Too large | — |
| Cosmos 3 Nano | 11.9 GB | ✗ Too large | — |
| Cosmos 3 Edge | 4.1 GB | ✓ Fits | ~37.1 tok/s |
What to watch out for
- Only ~0.4 GB of headroom at Q8_0: a longer context or a second application can push this into swapping.
- 2 larger variants of Cosmos 3 do not fit and would need CPU offload or different hardware.
- This model does not publish its full attention configuration, so the KV-cache share of these figures is inferred from its parameter count rather than computed exactly.
- These figures assume CPU-only inference. Any discrete GPU, even an 8 GB one, will be several times faster for models that fit in its VRAM.
Recommended setup
llama.cpp (CPU build) or Ollama — both run without a GPU
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 6.4 GB of the 8 GB is treated as usable for model weights (80% — the rest is the OS and running applications).
- DDR5-5600 dual channel at 89.6 GB/s peak. CPU decode is assumed to sustain 35% of that peak, because CPU inference is not purely bandwidth-bound — it also spends real time in compute and thread synchronisation. This figure is an assumption, not a fitted constant: no CPU measurement is in the calibration set.
- CPU-only inference: no GPU is assumed. A GPU of any size will beat these figures substantially.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is inferred from the parameter count because this model does not publish its full attention configuration.
FAQ
Can I run Cosmos 3 on 8 GB system RAM?
Yes, but it is tight — Cosmos 3 Edge at Q8_0 needs about 6 GB of the 6.4 GB usable on 8 GB system RAM, leaving only ~0.4 GB before the runtime starts swapping. Expect ~24.6 tok/s (estimated), with room for about 8,192 tokens of context.
Which quantization of Cosmos 3 should I use on 8 GB system RAM?
Q8_0 — it needs about 6 GB of the 6.4 GB available, downloads as roughly 4.3 GB, and runs at an estimated 24.6 tokens/sec with up to 8K of context.
What limits Cosmos 3 on 8 GB system RAM?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
llama.cpp (CPU build) or Ollama — both run without a GPU
Other RAM Capacities
Other Models on 8 GB system RAM
Cosmos 3 on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | Cosmos 3 model page | Check your hardware