Can I Run Mistral Small 3.1 on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Written by Jakub Rusinowski · Last updated March 17, 2025
Yes
Yes — Mistral Small 3.1 24B at Q3_K_M needs about 12.2 GB of the 16 GB usable on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) (~3.8 GB spare), at ~29.3 tok/s (estimated), with room for about 16,384 tokens of context.
Confidence: high · Recommended quantization: Q3_K_M · Estimated speed: ~29.3 tok/s
RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) — what it gives a model
| Usable memory for models | 16 GB |
| Memory bandwidth | 448 GB/s |
| Form factor | Desktop |
| Operating system | Windows or Linux |
| Memory upgradeable | Yes |
Mistral Small 3.1 on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM): memory by quantization
| Quant | Memory needed | Fits 16 GB? | Max context | Est. speed | Download |
|---|
| F16 | 49.3 GB | ✗ No | — | — | 47.2 GB |
| Q8_0 | 27.2 GB | ✗ No | — | — | 25.1 GB |
| Q6_K | 21.5 GB | ✗ No | — | — | 19.4 GB |
| Q5_K_M | 18.9 GB | ✗ No | — | — | 16.7 GB |
| Q4_K_M | 16.4 GB | ✗ No | — | — | 14.2 GB |
| Q3_K_M | 12.2 GB | ✓ Yes | 16K | ~29.3 tok/s | 10.1 GB |
| Q2_K | 9.9 GB | ✓ Yes | 32K | ~36.6 tok/s | 7.8 GB |
What to watch out for
- Q3_K_M is the only quantization that fits, and it is a heavily degraded one — expect noticeably worse output than the same model at Q4_K_M. A smaller model at Q4 is usually the better trade.
- 1 larger variant of Mistral Small 3.1 does not fit and would need CPU offload or different hardware.
RTX 5060 Ti 16 GB desktop limitations
- The cheapest current 16 GB card, but its 448 GB/s bandwidth caps generation speed well below a 5080 on the same model.
Recommended setup
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 16 GB of VRAM on the NVIDIA GeForce RTX 5060 Ti 16GB at 448 GB/s.
- 32 GB of system RAM available for CPU offload when a model exceeds VRAM.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Mistral Small 3.1 on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Yes — Mistral Small 3.1 24B at Q3_K_M needs about 12.2 GB of the 16 GB usable on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM) (~3.8 GB spare), at ~29.3 tok/s (estimated), with room for about 16,384 tokens of context.
Which quantization of Mistral Small 3.1 should I use on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Q3_K_M — it needs about 12.2 GB of the 16 GB available, downloads as roughly 10.1 GB, and runs at an estimated 29.3 tokens/sec with up to 16K of context.
What limits Mistral Small 3.1 on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or llama.cpp (CUDA/ROCm) — vLLM if you need concurrent serving
Other Computers
Other Models on RTX 5060 Ti 16 GB Desktop (16 GB VRAM, 32 GB RAM)
Mistral Small 3.1 on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | Mistral Small 3.1 model page | Check your hardware