Can I Run Phi 3.5 Family on Mac Studio (M3 Ultra, 256 GB)?
Superseded model. Phi 3.5 Family has been superseded by Phi-4 Family. This page is kept for reference; the newer family is a better starting point.
View Phi-4 Family →
Written by Jakub Rusinowski · Last updated August 20, 2024
Yes — comfortably
Yes, comfortably — Phi 3.5 Mini at Q8_0 needs about 5.6 GB of the 192 GB usable on Mac Studio (M3 Ultra, 256 GB), leaving ~186.4 GB spare and running at ~77.6 tok/s (estimated), with room for about 131,072 tokens of context.
Confidence: high · Recommended quantization: Q8_0 · Estimated speed: ~77.6 tok/s
Mac Studio (M3 Ultra, 256 GB) — what it gives a model
| Usable memory for models | 192 GB |
| Memory bandwidth | 819 GB/s |
| Form factor | Desktop |
| Operating system | macOS |
| Memory upgradeable | No — soldered |
Phi 3.5 Family on Mac Studio (M3 Ultra, 256 GB): memory by quantization
| Quant | Memory needed | Fits 192 GB? | Max context | Est. speed | Download |
|---|
| F16 | 9.2 GB | ✓ Yes | 128K | ~48 tok/s | 7.6 GB |
| Q8_0 | 5.6 GB | ✓ Yes | 128K | ~77.6 tok/s | 4 GB |
| Q6_K | 4.7 GB | ✓ Yes | 128K | ~92.3 tok/s | 3.1 GB |
| Q5_K_M | 4.3 GB | ✓ Yes | 128K | ~101 tok/s | 2.7 GB |
| Q4_K_M | 3.9 GB | ✓ Yes | 128K | ~111 tok/s | 2.3 GB |
| Q3_K_M | 3.2 GB | ✓ Yes | 128K | ~133.2 tok/s | 1.6 GB |
| Q2_K | 2.9 GB | ✓ Yes | 128K | ~149.7 tok/s | 1.2 GB |
What to watch out for
- Memory on this machine is not upgradeable, so the configuration you buy is the ceiling for every model you will ever run on it.
Mac Studio M3 Ultra 256 GB limitations
- The largest single-box unified memory pool available, but at roughly half the memory bandwidth of a high-end discrete GPU — very large models load, then run slowly.
- Memory is soldered; the configuration chosen at purchase is permanent.
Recommended setup
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 256 GB unified memory at 819 GB/s, shared between CPU and GPU.
- macOS reserves a share of unified memory for the system, so not all of it is available to a model.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is computed from this model's published attention configuration.
FAQ
Can I run Phi 3.5 Family on Mac Studio (M3 Ultra, 256 GB)?
Yes, comfortably — Phi 3.5 Mini at Q8_0 needs about 5.6 GB of the 192 GB usable on Mac Studio (M3 Ultra, 256 GB), leaving ~186.4 GB spare and running at ~77.6 tok/s (estimated), with room for about 131,072 tokens of context.
Which quantization of Phi 3.5 Family should I use on Mac Studio (M3 Ultra, 256 GB)?
Q8_0 — it needs about 5.6 GB of the 192 GB available, downloads as roughly 4 GB, and runs at an estimated 77.6 tokens/sec with up to 128K of context.
What limits Phi 3.5 Family on Mac Studio (M3 Ultra, 256 GB)?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput
Other Computers
Other Models on Mac Studio (M3 Ultra, 256 GB)
Phi 3.5 Family on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | Phi 3.5 Family model page | Check your hardware