Can I Run GLM-4.7 / GLM-Z1 on 8 GB system RAM?
作者： Jakub Rusinowski · 最后更新： 2026年8月15日
Yes, but it is tight
Yes, but it is tight — GLM-4.7 9B at Q3_K_M needs about 5.8 GB of the 6.4 GB usable on 8 GB system RAM, leaving only ~0.6 GB before the runtime starts swapping. Expect ~14.6 tok/s (estimated), with room for about 8,192 tokens of context.
Confidence: low · Recommended quantization: Q3_K_M · Estimated speed: ~14.6 tok/s
8 GB system RAM — what it gives a model
| Usable memory for models | 6.4 GB |
| Memory bandwidth | 90 GB/s |
GLM-4.7 / GLM-Z1 on 8 GB system RAM: memory by quantization
| Quant | Memory needed | Fits 6.4 GB? | Max context | Est. speed | Download |
|---|
| F16 | 20 GB | ✗ No | — | — | 18 GB |
| Q8_0 | 11.6 GB | ✗ No | — | — | 9.6 GB |
| Q6_K | 9.4 GB | ✗ No | — | — | 7.4 GB |
| Q5_K_M | 8.4 GB | ✗ No | — | — | 6.4 GB |
| Q4_K_M | 7.4 GB | ✗ No | — | — | 5.4 GB |
| Q3_K_M | 5.8 GB | ✓ Yes | 8K | ~14.6 tok/s | 3.8 GB |
| Q2_K | 5 GB | ✓ Yes | 16K | ~18.1 tok/s | 3 GB |
Which GLM-4.7 / GLM-Z1 sizes fit
| Variant | Needs at Q4_K_M | Fits? | Est. speed |
|---|
| GLM-Z1 32B (Reasoning) | 22 GB | ✗ Too large | — |
| GLM-4.7-Flash 30B-A3B | 20.7 GB | ✗ Too large | — |
| GLM-4.7 9B | 7.4 GB | ✗ Too large | — |
What to watch out for
- Only ~0.6 GB of headroom at Q3_K_M: a longer context or a second application can push this into swapping.
- Q3_K_M is the only quantization that fits, and it is a heavily degraded one — expect noticeably worse output than the same model at Q4_K_M. A smaller model at Q4 is usually the better trade.
- 3 larger variants of GLM-4.7 / GLM-Z1 do not fit and would need CPU offload or different hardware.
- This model does not publish its full attention configuration, so the KV-cache share of these figures is inferred from its parameter count rather than computed exactly.
- These figures assume CPU-only inference. Any discrete GPU, even an 8 GB one, will be several times faster for models that fit in its VRAM.
Recommended setup
llama.cpp (CPU build) or Ollama — both run without a GPU
How these numbers are calculated
- Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
- 6.4 GB of the 8 GB is treated as usable for model weights (80% — the rest is the OS and running applications).
- DDR5-5600 dual channel at 89.6 GB/s peak. CPU decode is assumed to sustain 35% of that peak, because CPU inference is not purely bandwidth-bound — it also spends real time in compute and thread synchronisation. This figure is an assumption, not a fitted constant: no CPU measurement is in the calibration set.
- CPU-only inference: no GPU is assumed. A GPU of any size will beat these figures substantially.
- Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
- KV cache is inferred from the parameter count because this model does not publish its full attention configuration.
FAQ
Can I run GLM-4.7 / GLM-Z1 on 8 GB system RAM?
Yes, but it is tight — GLM-4.7 9B at Q3_K_M needs about 5.8 GB of the 6.4 GB usable on 8 GB system RAM, leaving only ~0.6 GB before the runtime starts swapping. Expect ~14.6 tok/s (estimated), with room for about 8,192 tokens of context.
Which quantization of GLM-4.7 / GLM-Z1 should I use on 8 GB system RAM?
Q3_K_M — it needs about 5.8 GB of the 6.4 GB available, downloads as roughly 3.8 GB, and runs at an estimated 14.6 tokens/sec with up to 8K of context.
What limits GLM-4.7 / GLM-Z1 on 8 GB system RAM?
Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.
Which runtime should I use?
llama.cpp (CPU build) or Ollama — both run without a GPU
Other RAM Capacities
Other Models on 8 GB system RAM
GLM-4.7 / GLM-Z1 on GPUs
What This Model Is Good At
Model & Tools
← Can I Run It? | GLM-4.7 / GLM-Z1 model page | Check your hardware