Can I Run IBM Granite 4.0 on Mac Studio (M3 Ultra, 256 GB)?

Autor: Jakub Rusinowski · Ostatnia aktualizacja: 15 sierpnia 2026

Mac Studio (M3 Ultra, 256 GB) — what it gives a model

Usable memory for models	192 GB
Memory bandwidth	819 GB/s
Form factor	Desktop
Operating system	macOS
Memory upgradeable	No — soldered

IBM Granite 4.0 on Mac Studio (M3 Ultra, 256 GB): memory by quantization

Quant	Memory needed	Fits 192 GB?	Max context	Est. speed	Download
F16	66.6 GB	✓ Yes	128K	~22.1 tok/s	64 GB
Q8_0	36.6 GB	✓ Yes	128K	~37.9 tok/s	34 GB
Q6_K	28.9 GB	✓ Yes	128K	~46.5 tok/s	26.2 GB
Q5_K_M	25.3 GB	✓ Yes	128K	~51.9 tok/s	22.7 GB
Q4_K_M	22 GB	✓ Yes	128K	~58.3 tok/s	19.3 GB
Q3_K_M	16.3 GB	✓ Yes	128K	~73.5 tok/s	13.6 GB
Q2_K	13.2 GB	✓ Yes	128K	~85.9 tok/s	10.5 GB

What to watch out for

• This model does not publish its full attention configuration, so the KV-cache share of these figures is inferred from its parameter count rather than computed exactly.
• Memory on this machine is not upgradeable, so the configuration you buy is the ceiling for every model you will ever run on it.

Mac Studio M3 Ultra 256 GB limitations

• The largest single-box unified memory pool available, but at roughly half the memory bandwidth of a high-end discrete GPU — very large models load, then run slowly.
• Memory is soldered; the configuration chosen at purchase is permanent.

Recommended setup

Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput

How these numbers are calculated

• Memory need = quantized weights + KV cache at 8,192 tokens (f16) + 0.8 GB runtime overhead.
• 256 GB unified memory at 819 GB/s, shared between CPU and GPU.
• macOS reserves a share of unified memory for the system, so not all of it is available to a model.
• Throughput is a memory-bandwidth roofline estimate, not a measurement. It is labelled "estimated" everywhere it appears.
• KV cache is inferred from the parameter count because this model does not publish its full attention configuration.

FAQ

Can I run IBM Granite 4.0 on Mac Studio (M3 Ultra, 256 GB)?

Yes, comfortably — Granite 4.0 Small-H 32B-A9B at Q8_0 needs about 36.6 GB of the 192 GB usable on Mac Studio (M3 Ultra, 256 GB), leaving ~155.4 GB spare and running at ~37.9 tok/s (estimated), with room for about 131,072 tokens of context.

Which quantization of IBM Granite 4.0 should I use on Mac Studio (M3 Ultra, 256 GB)?

Q8_0 — it needs about 36.6 GB of the 192 GB available, downloads as roughly 34 GB, and runs at an estimated 37.9 tokens/sec with up to 128K of context.

What limits IBM Granite 4.0 on Mac Studio (M3 Ultra, 256 GB)?

Nothing binding — the model fits with headroom and generates at a usable speed on this hardware.

Which runtime should I use?

Ollama or LM Studio (Metal) — MLX for the fastest Apple-native throughput

Other Computers

• IBM Granite 4.0 on RTX 4090 desktop
• IBM Granite 4.0 on RTX 5090 desktop
• IBM Granite 4.0 on RTX 3090 desktop
• IBM Granite 4.0 on Mac Studio M4 Max 64 GB

Other Models on Mac Studio (M3 Ultra, 256 GB)

• IBM Granite 4.1 on Mac Studio (M3 Ultra, 256 GB)
• InternLM 3 on Mac Studio (M3 Ultra, 256 GB)
• Llama 3.1 Family on Mac Studio (M3 Ultra, 256 GB)
• Llama 3.2 Family on Mac Studio (M3 Ultra, 256 GB)
• Llama 3.2 Vision on Mac Studio (M3 Ultra, 256 GB)

IBM Granite 4.0 on GPUs

• IBM Granite 4.0 on NVIDIA GeForce RTX 5090
• IBM Granite 4.0 on NVIDIA GeForce RTX 5080
• IBM Granite 4.0 on NVIDIA GeForce RTX 5070 Ti
• IBM Granite 4.0 on NVIDIA GeForce RTX 5070

What This Model Is Good At

• Best local LLMs for rag
• Best local LLMs for agents
• Best local LLMs for document analysis

Model & Tools

• IBM Granite 4.0 model page
• VRAM calculator
• Check your own hardware

← Can I Run It? | IBM Granite 4.0 model page | Check your hardware